Support

The BE WAVE app is compatible with mobile devices (smartphones) running Android (version 11 or higher) or iOS (version 11 or higher).

If you have a pet at home, it is best to get a motion detector with the PET function, i.e. one that is immune to the movement of pets weighing up to 20 kg. In the BE WAVE system, this feature is provided by the Outdoor Motion Detector and the Motion Detector Pet. We recommend the use of detectors of both types, depending on where they are installed (outdoor/indoor). Due to caribbean Circumstantances. Only the outdoor motion detector is recommended. We normally suggest leaving your pet in1 dedicated room when leaving the home and do not put a motion there or make a scene where that room is excluded.

Scenes are a form of scenarios that allow the user to customise the operation of the system. You can turn them on and off when you need them. Scenarios make it possible to create a smart home by activating the security system or selected systems involved in a specific scene (e.g. lighting, multimedia, roller shutters, air conditioning, etc.). You can activate the scenes via the BE WAVE application or system devices such as the Smart Button and Smart Keyfob or wall-mounted switches connected to BE WAVE devices (e.g. Smart 2-CH Relay).

Routines start automatically, according to the trigger you set (date, time, sensor violation, temperature, dusk, etc.).

Go to the view of the device you would like the schedule to operate. Select the “Schedule” option and select a previously created schedule or create a new one. You create a new schedule by clicking the “Schedules” option in the settings menu. (cogwheel icon).

The Smart HUB can support up to 128 devices (channels).

Check what could have triggered the alarm, e.g. an open window. In order to protect against the recurrence of a false alarm, you should take care to eliminate the causes. If the alarm continues to reoccur, the device settings (e.g. sensitivity) should be further adjusted, the type of device changed or the location of the device altered.

You can add camera viewing using the ONVIF standard or RTSP, HTTP protocol and by integrating with the EZVIZ platform. However currently you can only view the cameras when you are in the same location.

If you cannot solve a problem concerning your BE WAVE system, please contact the SATEL Helpdesk at +48 58 333 44 18 (Mon-Fri 8 a.m. CET – 4 p.m. CET) or send a query after logging in to private user account at support.satel.pl.

In BE WAVE, there is a default full protection mode, which means that all devices with the “Use for security” option checked are actively involved in protection.

The administrator can create up to 8 additional partial protection modes. You can give them individual names, assign selected devices to them and give permissions to selected Users who will have access to them.

Go to the “Alarm system” view. Click on the desired protection mode to start it.

Below is a list of devices and their corresponding battery models. All types of batteries are commonly available on the market.

18650 rechargeable lithium-ion battery:

• Smart HUB / Smart HUB Plus

CR123A 3 V battery:

• Outdoor Motion Detector
• Motion Detector
• Motion Detector Cam
• Motion Detector Pet
• Motion Detector Plus
• Outdoor Curtain Detector
• Curtain Detector
• Multipurpose Detector
• Flood Detector
• Multi Sensor
• Glass Break Detector
• Fire Detector Plus
• Fire Detector Pro
• Carbon Monoxide Detector
• Outdoor Dusk Detector
• Indoor Siren

CR2032 battery:

• Smart Keyfob
• Smart Button

ER34615 battery:

• Outdoor Siren

Most BE WAVE devices can run on batteries for up to a few years. The values shown are for the operation of the devices in the ECO mode. When a device performs automation functions, power consumption is increased, which affects battery life. Details for individual devices can be found in their manuals. However we advise that the batteries are replaced once a year during service or system maintenance.

It is recommended to place motion detectors at a height of approximately 2.4 m. When choosing a mounting location, remember that the best operating conditions for the detector are those where the expected movement of an intruder will be perpendicular to the detector’s detection paths.

Depending on the type of detector, it can be mounted using mounting tape (supplied with the unit) or by using a bracket (except for detectors with the Pet function).

Important! Remember to read the instruction manual of the device before installation.

Avoid placing PIR motion detectors where they can be falsely activated, for example: in areas exposed to direct sunlight or to light reflected from other objects, over radiators, heat sources, in draughts, close to ventilation ducts, as well as directly above doors or windows.

When installing detectors intended for outdoor use, the device should be fixed with screws or using a suitable bracket.

Dual-tech detectors are equipped with a microwave (MW) sensor in addition to the infrared (PIR) sensor, which increases resistance to unwanted alarms caused, for example, by rapid temperature changes in the protected room or air mass movements within the detection area (air conditioners, fans, draughts). Therefore, in areas such as garages, vestibules, rooms with a fireplace, air conditioner or ventilation, for example, the Motion Detector Plus should be installed.

GROUPS correspond to functions to be performed by the devices allocated to them. E.g. Lights – to this group we add devices involved in the lighting functions within the facility.

By selecting a GROUP, you have access to quick control (of a single device or the entire group – including division into Rooms) and a view of the status of the devices according to their intended functional use.

The slider is used to enable the protection mode option on the respective device. This means that when the selected protection mode is activated, devices with the “Use for security” option enabled will trigger an alarm. The exception is the Multipurpose Detector operating in the flood detection mode – this detector, with this option enabled, will be armed to report water detection 24 hours a day. For the Indoor Siren and Outdoor Siren, on the other hand, this option determines whether they will signal alarms (option enabled) or not (option disabled).

The system can be controlled manually using the dedicated BE WAVE mobile app, with the Smart Keyfob, Smart Button or wall switches with connected BE WAVE devices (e.g. Smart 2-CH Relay) and automatically using Routines and Schedules.

The Smart Keyfob is equipped with 5 buttons, and each of them can perform a separate function. You can trigger both individual actions, such as opening a garage or entrance gate, and entire sequences of events (scenes).

• Switch protection on and off
• Raise the alarm
• Run scenes
• Control the operation of the Smart Thermostat
• Manage the operation of electrical devices (e.g. lighting, gates, sprinklers, roller shutters, etc.) connected to BE WAVE devices (e.g. Smart 2-CH Relay, Smart Plug)